My new quick release system on the Thrustmaster TX base needed new wiring so it could handle more wires to my connector of choice, the 15 pin VGA connector.
I wanted to have the 6 pins from Thrustmaster so I could still use Thrustmaster's own wheels, in addition I wanted two USB lines, the last pin is for the grounded shield.
Bought this 160mm 15 Core Coiled Cable of ebay.
I 3D printed this cableholder I drew, and secured it with a ziptie so it won't twist my soldered cables.
Here is my wiring diagram, I chose to use VGA female connector on steering wheel because this is the part that will be laying around, so there is no chance of bend pins.
( ) is the color of original cable
[ ] is the color of my ebay cable
VGA pin 1: USB 1 (Red) [Red]
VGA pin 2: USB 1 (White) [White]
VGA pin 3: USB 1 (Green) [Green]
VGA pin 4: USB 1 (Black) [Black]
VGA pin 5: TX (Green) [Yellow]
VGA pin 6: TX (Blue) [Dark Blue]
VGA pin 7: TX (White) [Offwhite]
VGA pin 8: TX (Orange) [Light Brown]
VGA pin 9: TX (Red) [Purple]
VGA pin 10: TX (Brown) [Dark Brown]
VGA pin 11: USB 2 (Red) [Orange]
VGA pin 12: USB 2 (White) [Light Grey]
VGA pin 13: USB 2 (Green) [Light Green]
VGA pin 14: USB 2 (Black) [Grey]
VGA pin 15: Ground shield [Light Blue]
The stl for my cable holder can be found on thingiverse:
https://www.thingiverse.com/thing:2748230
No comments:
Post a Comment